Tools for Metashape
Seven tools to check photos before processing, prepare reference files and verify deliverables and project copies. All checks run in your browser.
Reports and exports for your projects
Run a free check, then buy the tool to download its reports or project files. Each tool is a one-time purchase.
Free tools for Metashape
All three tools are free to use, including the CSV download from GCP Import Fix and the repaired OBJ package.
Choose a tool
GeoTIFF Delivery Check
Compare an orthomosaic’s coordinate system and pixel size with the delivery requirements.
Open GeoTIFF Delivery CheckGCP Import Fix
Prepare ground control coordinates from a GNSS or spreadsheet export for import into Metashape Professional.
Open GCP Import FixOBJ Texture Repair
Reconnect materials and textures when an exported 3D model opens grey after it has been moved.
Open OBJ Texture RepairGeoTIFF Delivery Check
A GeoTIFF is a map image with location information. Use the checker to see where your map belongs and what pixel size was exported.
File and requirements
TIFF and BigTIFF supported. Your file stays in your browser.
Check results
Open your GeoTIFF or try the sample to start.
Checks use embedded file metadata. Ground coverage and positional accuracy require separate checks.
How to check your first export
Try the included sample
The sample has 5 cm pixels. The checker compares it with a 2 cm requirement so you can see how it flags a difference.
Export a map in the trial
Once you have built an orthomosaic in the Metashape Professional trial, select File → Export Orthomosaic and save it as TIFF/GeoTIFF.
Agisoft’s export guideRead your result
Open your export to see its details. If your project specifies an EPSG code or a maximum pixel size, enter those values to see what matches.
GCP Import Fix
Turn a GNSS or spreadsheet export into a clean CSV ready to import into Metashape Professional.
Reads UTF-8 files up to 1 MB. The file is processed in this browser.
Load some coordinates to start.
In Metashape Professional, import through the Reference pane. Choose comma, skip the header, map Label, X, Y and Z, and select the source coordinate system used by your survey.
The tool normalizes the file format. Confirm the original coordinate system and height reference with your survey notes.
OBJ Texture Repair
Recover broken texture links when an exported OBJ opens grey or loses its textures after you move it.
One OBJ per check. Files stay in your browser. Maximum 120 MB per package.
Open a model or try the example.
Extract the ZIP and open model.obj. Keep its material files and textures in the same folder.
Have the original material and texture files ready. The repair reconnects those files using relative paths.
Frequently asked questions
GeoTIFF Delivery Check
Can I use the checker during the 30-day trial?
Yes. You can use the included sample right away or inspect a GeoTIFF you export while evaluating the Metashape Professional trial.
What if I don’t know which EPSG code to enter?
Leave the field empty to see the code written in your file. An EPSG code identifies the coordinate system a mapping program uses to place your image. Enter the code specified by your project when you have it.
What does a pixel size of 5 cm mean?
Each pixel spans about 5 cm in the map’s coordinate system. To assess how accurately the features are positioned, compare their coordinates with independently measured check points.
Where is my GeoTIFF processed?
The checker reads the file’s metadata in your browser on your device.
GCP Import Fix
What files can I use with GCP Import Fix?
Use a UTF-8 CSV, TSV or text file from your GNSS receiver or spreadsheet. You can also paste the coordinates. Confirm the point name, X, Y and height columns and the source decimal separator before downloading.
Which coordinate system should I select in Metashape?
Use the coordinate system and height reference of your original survey. GCP Import Fix prepares the column order and decimal format. When importing from the Reference pane, select the original coordinate system and skip the CSV header.
OBJ Texture Repair
What files do I need to repair an OBJ?
Select one OBJ, its MTL material files and the original texture images together. If the tool identifies a missing texture, add that file to the selection and run the check again.
How do I open the repaired model?
Extract the downloaded ZIP and open model.obj in your 3D application. Keep the OBJ, MTL and texture files in the same folder so their relative links work when you move or share the model.

